GE Fanuc D0M202 Advanced PLC Module for Industrial Automation

GE Fanuc D0M202 Advanced PLC Module for Industrial Automation

Processor Speed:96 MHz, 32-bit, floating-point Memory Size:1 MB Communication Interface:Ethernet CPU Type:Floating Point Operating System:Microsoft Windows Compatible Power Supply:12VDC Dimensions:120mm x 80mm x 50mm Weight:0.2kg The GE-FANUC D0M202 is equipped with a powerful Intel Xeon Quad-Core processor, ensuring swift and efficient operation even under demanding conditions. It comes with 8GB DDR4 RAM and 16GB Flash Memory, providing ample space for complex control logic and extensive data storage. Equipped with a 1Gb Ethernet interface, this PLC supports seamless connectivity with various devices in the industrial network, facilitating real-time data exchange and remote access for monitoring and maintenance purposes. With support for up to 2048 inputs and outputs, the D0M202 can manage large-scale industrial automation tasks efficiently, making it suitable for a wide range of applications from manufacturing lines to complex process control systems. 

 This PLC operates within an impressive temperature range of -20"C to 55"C, ensuring reliable performance in both cold and hot environments. Its IP65 rated housing provides protection against dust and water ingress, guaranteeing durability in industrial settings. Designed with user-friendliness in mind, the GE-FANUC D0M202 features an intuitive interface and comprehensive diagnostics tools. This ensures easy setup, maintenance, and troubleshooting, allowing operators to focus on their core processes without being bogged down by technical complexities. The GE Fanuc D0M202 is a high-performance Programmable Logic Controller (PLC) module designed for industrial automation, offering seamless integration, advanced control capabilities, and enhanced system reliability. 

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).