EPRO MMS6120 Dual Channel Bearing Vibration Monitor

EPRO MMS6120 Dual Channel Bearing Vibration Monitor

Product Overview

The EPRO MMS6120 Dual-Channel Bearing Vibration Monitor is a high-performance industrial monitoring device designed for real-time monitoring and protection of various types of turbomachinery, such as steam turbines, combustion turbines, compressors, fans, gearboxes, blowers and centrifuges. The monitor adopts a dual-channel design, capable of monitoring bearing vibration data from two channels simultaneously, providing users with comprehensive and accurate information on equipment operation.

Main Features

Dual-channel design:

The MMS6120 is equipped with two independent channels, which can monitor the vibration of two bearings at the same time, improving the accuracy and reliability of monitoring.

High-precision measurement:

Adopting advanced electrodynamic speed sensor, it can accurately measure bearing vibration (tile vibration) and convert the vibration signal into standard signal output.

Multiple functions:

In addition to vibration monitoring, the monitor also provides alarms, sensor power supply, module power supply, channel and sensor detection and signal filtering.

Easy integration:

The MMS6120 supports a variety of interfaces and network connections, making it easy for users to integrate it into existing monitoring systems for remote monitoring and data transmission.

Expandability:

Users can set the working mode and parameters, read all the measured values, and carry out spectrum analysis and other operations through the on-site portable machine or remote communication bus according to the actual needs.

Technical specifications

Input voltage range:

Usually used in conjunction with the PR926X series motorised sensors manufactured by epro Germany, the input voltage range is -5 to +15Vdc.

Sensor Type:

Electrodynamic speed sensor for measuring bearing vibration.

Measurement range:

Dependent on the sensor type and configuration, usually able to cover a wide range of vibration frequencies and amplitudes.

Accuracy:

Highly accurate measurements to ensure data accuracy and reliability.

Operating temperature:

Suitable for a variety of industrial environments with a wide operating temperature range.

Application Scenarios

EPRO MMS6120 dual-channel bearing vibration monitor is widely used in a variety of industrial applications that require bearing vibration monitoring, including but not limited to:

Power industry:

Used to monitor the bearing vibration of turbines, generators and other equipment to ensure the safe and stable operation of the equipment.

Petrochemical industry:

Used to monitor the bearing vibration of compressors, pumps and other equipment to prevent equipment failure and downtime.

Iron and steel metallurgy industry:

Used to monitor the bearing vibration of rolling mills, fans and other equipment to improve production efficiency and product quality.

Transport industry:

Monitoring bearing vibration in high-speed rail, underground and other rail transit vehicles to ensure the safety and stability of vehicle operation.

Operation and Maintenance

Operation guide:

Users should read the product manual carefully to understand the operation methods and precautions of the monitor. During operation, safety norms should be observed to ensure personal and equipment safety.

Maintenance Recommendations:

Regularly check the installation and connection of the sensor to ensure that the clearance between the sensor and the bearing is within the specified range.

Clean the surface of the sensor and monitor to avoid the influence of dust and dirt on the measurement accuracy.

Regularly check the power supply and signal lines of the monitor to ensure that the connections are reliable and free from looseness or damage.