VIBRO-METER MPC4 200-510-078-115 Mechanical Protection Card

VIBRO-METER MPC4 200-510-078-115 Mechanical Protection Card

Key features

Channel Configuration: 4 dynamic signal channels and 2 RPM (speed) channels, each of which can be individually programmed to measure and monitor multiple signal inputs at the same time.

Signal Processing: Adopting advanced DSP technology, it supports real-time measurement and monitoring of acceleration, speed, displacement and other signals. It is equipped with digital processing functions such as digital filtering, integration or differentiation, rectification, order tracking, etc. It can also measure the gap between the sensor and the target.

Filter: with programmable wideband and narrowband filters, which can be flexibly configured according to different measurement needs.

Alarm settings: Programmable alarm and hazard setpoints with adaptive alarm and hazard level functions that can be adjusted according to speed or external information. Each alarm level has an internal digital output that can drive a relay.

Power supply and connectivity: Integrated power supply for sensors and signal conditioners, with BNC connectors on the front panel for easy analysis of buffered ‘raw’ sensor signals for commissioning and troubleshooting.

Status Indication: Front panel has LEDs to indicate system status, alarms, and whether a processing or hardware error has occurred, each input channel also has a corresponding LED to indicate OK if the system has detected a fault.

Hot-swappable function: Supports real-time card insertion and removal, which is convenient for maintenance and replacement during system operation.

Various versions: ‘Standard’, ‘Circuit Independent’ and ‘Safety’ (SIL) versions are available to meet the functional safety requirements of different application scenarios. The ‘Standard’ and ‘SIL’ versions are certified to IEC 61508 and ISO 13849.

Areas of application

Power industry: for vibration monitoring and protection of power generation equipment such as gas turbine, steam turbine, etc., to ensure stable operation of the equipment and safeguard power supply.

Petrochemical industry: in compressors, pumps and other key equipment, monitoring the vibration status of the equipment, timely detection of potential failures, to avoid production interruptions or safety accidents caused by equipment failure.

Other industrial fields: It can also be applied to various industrial scenarios that require condition monitoring and protection of rotating machinery, such as large-scale rotating equipment in metallurgy, paper making, cement and other industries.

Precautions for Use

Installation Environment: It should be installed in a dry, well - ventilated, dust - free, and non - corrosive gas environment. Avoid installing it in places with high temperature, high humidity, vibration, or strong electromagnetic interference.

Wiring Specifications: Wire strictly in accordance with the specifications and requirements of the terminal strip to ensure that the wires are firmly connected and avoid problems such as loose connections or short - circuits.

Load Matching: Select an appropriate power terminal strip according to the power and current requirements of the connected devices to ensure that it can bear the corresponding load.

Regular Maintenance: Regularly inspect and maintain the power terminal strip, clean dust and debris, check for loose connections, and promptly detect and address potential problems.