UNIOP ERT-16 Industrial PLC

UNIOP ERT-16 Industrial PLC

DESCRIPTION

The ERT-16 fulfills the need for a powerful yet cost effective operator interface system. Displays are sixteen lines of a pixel based LCD in monochrome color. These pixel addressable displays allow graphic capabilities with our Designer for Windows software package. Each page can contain 16 lines. Each line can contain up to 40 characters. Brightness control is provided to adjust the display for easy viewing under nearly any condition.

ERT-16 - Industrial PLC Workstation

● 16 Line x 40 Character LCD 

● Full-Graphic 320x240 Pixel Resolution 

● Touchscreen Matrix Size 16x40

Display Variables

PLC internal variables can be shown on any of the many display pages. The number of variables that can be viewed at one time is limited only by the display size. UniOP also provides scaling (linear conversion) of the displayed data. The final value can then be shown in several useful formats including bargraph, date, time, decimal, bit, hexadecimal, floating point, and string. Data entry with valid range verification is also available for each data type.

Data Entry

The ETT-VGA gives the user eight configurable function keys and seven user-definable LEDs. The analog touchscreen adds the ability to create touchcells as small as a single character or as large as the entire screen.

Alarms

UniOP can monitor and display up to 1024 alarms. Attributes and unique messages for each alarm can be defined. Operator acknowledgment can also be required. The last 256 alarm events detected by the PLC are retained in an internal event list. This list can be viewed on screen or printed on a serial printer to obtain a permanent record.

Adaptability

Custom display screens are developed using the UniOP Designer™ for Windows™ programming software. Your completed project file can be downloaded to the display through the serial port and permanently stored in a Flash EPROM.

UniNET Network

The UniNET network allows you to design networks of varying configurations; from two panels with one PLC to multiple panels with multiple PLCs. Data can be written to or retrieved from the PLCs in many different locations at one time. The UniNET network creates a bridge between UniOP panels which allows data to be shared by all PLCs in the network, regardless of the type or manufacturer.

ERT-16 Features

● NEMA 4/12 compliant enclosure 

● CE approved 

● UniNET network capabilities 

● Keyboard Macro Editor 

● Recipe configuration 

● One RS-232 / RS-422 / RS-485 / 20mA current loop serial port, speeds up to 38,400 baud for direct PLC connection 

● One RS -232 port for PC or printer communications 

● 512 KB internal memory standard Flash EPROM 

● Optional 512 KB memory upgrade (1 MB total memory) 

● Real time clock with battery back-up 

● Unlimited number of variables per page 

● 1024 prioritized alarms 

● Historical event list (last 256 events) 

● Eight-level password protection 

● Print reports, alarm list, and event list to serial printer

● Displays ASCII standard character set