BENTLY 3300/25 Dual Accelerometer InputMonitor

BENTLY 3300/25 Dual Accelerometer InputMonitor

INTRODUCTION

The BENTLY 3300/25 Dual Accelerometer Input Monitor is a powerful, easy-to-integrate acceleration monitor for a wide range of industrial vibration monitoring applications. With its high accuracy, reliability and flexible configuration, it provides powerful support for equipment operating condition assessment and health management.

Technical Features

Dual Accelerometer Input: The monitor is capable of receiving signals from two accelerometers simultaneously, providing a more comprehensive vibration monitoring capability. This is especially important for applications that require simultaneous monitoring of vibration in multiple directions or at critical locations.

High Accuracy and Reliability: BENTLY Nevada's accelerometers and monitors are known for their high accuracy and reliability, ensuring accurate and reliable monitoring data.

Flexible Configuration: Users can configure the monitor's parameters to suit different monitoring scenarios and application requirements.

Easy to integrate: BENTLY 3300/25 Dual Accelerometer Input Monitor can be easily integrated into the existing monitoring system to achieve centralised data management and analysis.

Application Scenarios

The monitor is widely used in a variety of industrial fields, including but not limited to power generation, petrochemical, steel, cement, and so on. It is especially suitable for those critical equipment that requires high requirements on the operating status and health of the equipment, such as steam turbines, compressors, generators, etc.

Installation and Maintenance

Installation: When installing, you need to pay attention to the position and direction of the acceleration sensor to ensure that the vibration signal of the equipment can be accurately captured. It is also necessary to ensure that the connection between the monitor and the sensor is reliable to avoid signal interference or loss.

Maintenance: Regular maintenance and inspection of the monitor and sensor, including cleaning, calibration and replacement of damaged parts, etc., to ensure its long-term stable operation.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Models that may be required：

BENTLY 3500-33 16-Channel Relay Module

bently 106M1081-01 Power Input Module

Bently 3500/33m 16-Channel Relay Module

Bently 3500/32M 4-Channel Relay Module