SIEMENS SIMATIC HMI Basic Panels Operating Manual

SIEMENS SIMATIC HMI Basic Panels Operating Manual

Product Overview

Users therefore profit from the advantages of visualization, such as improved process quality, even with simple applications.

Equipment Overview and Structure

1. Product positioning and core functions

Positioning: Targeting small machines and simple applications, with the design concept of "focusing on core functions", balancing cost and performance, providing cost-effective visual solutions.

Standard features: All devices have SIMATIC quality, regardless of display size, with standard software functions such as alarm system, formula management, trend function, language switching, etc., which can improve the process quality of simple applications.

2. Structural details of each device

KP300 Basic mono PN: includes power connector, function keys, PROFINET interface, nameplate, display, installation seal, control keys, interface name, installation fixture cut, functional grounding connection, and is a monochrome display keyboard device.

KP400 Basic color PN: Adding data input keys on the basis of KP300, it is a color display keyboard device, which includes function keys such as ACK, TAE, SHIFT, and ENTE, and has an identification bar guiding device.

KTP series (KTP400/600/1000 Basic): All are "touch+function key" combination devices. KTP400/600 supports monochrome/color display, while KTP1000 only displays color. The structure adds a touch screen, and the interface includes PN/DP types. Some models have DIP switches (for RS422/RS485 configuration).

TP1500 Basic color PN: pure touch device, no function keys, only includes PROFINET interface, structure includes fixed components, installation seals, etc., display size is 15 inches.

3. Product packaging and accessories

Package contents:

Required components: HMI device (1 unit), quick installation guide (1 copy), installation seal (1 piece, KTP600 Basic needs to be installed separately, other devices are pre installed), power terminal (1 piece).

Installation fixtures: Configure according to equipment type differences, such as KP300 Basic with 4 plastic fixtures, KP400 Basic with 7 plastic fixtures, KTP400 Basic mono PN with 5 aluminum fixtures, etc.

Core accessory type:

Converter/adapter/connector: such as RS422 to RS232 converter (order number 6AV6671-8XE00-0AX0), PC/PPI cable (6ES7 901-3CB30-0XA0), USB/PPI cable (6ES7 901-3DB30-0XA0), PROFINET RJ45 connector (6GK1901-1BB10-2AA0), etc., clarify the purpose and adaptation scenarios of each accessory.

Clamping frame: such as the clamping frame for 10 "/12" touch devices (6AV6 671-8XS00-0AX0), used for reinforcement when the cutting material for KTP1000 Basic installation is insufficient.

Protective film: Classified by equipment size, such as 4-inch protective film (for KTP400 Basic mono PN, 6AV6 671-2EC00-0AX0), 15 inch protective film (for TP1500 Basic, 6AV6 574-1AD00-4EX0).

Service package: such as 20 plastic fixture sets (6AV6671-8KX00-0AX2), 10 power terminal sets (6AV6671-8XA00-0AX0).

Preparation before equipment installation

1. Packaging inspection and document storage

Inspection requirements: After receiving the equipment, check whether the packaging is damaged during transportation and confirm that the contents are intact (refer to the "Product Packaging" list); If damaged components are found, installation is not allowed and Siemens representatives should be contacted.

Document management: It is necessary to properly keep the accompanying documents, which are part of the equipment and require guidance from the documents for subsequent debugging and maintenance.

2. Confirmation of environmental conditions

Standard reference: It is necessary to familiarize oneself with the standards, certifications, EMC parameters, and technical specifications of the equipment in advance. Relevant information is distributed in "Certificates and approvals", "Electromagnetic compatibility" “Information on insulation tests, protection class and degree of protection”（ Sections such as insulation testing, protection level information, and "Power supply".

Mechanical and climatic conditions:

Operating environment: It must comply with the mechanical (vibration, shock) and climatic (temperature, humidity, air pressure) parameters specified in the "Conditions of use", and avoid use in areas with high ionizing radiation, corrosive environments, and strong electromagnetic interference (unless additional measures are taken).