GE IC200ALG260 Analog Input Module

GE IC200ALG260 Analog Input Module

Product Overview

The IC200ALG260 module is an 8-channel, 12-bit voltage/current analogue input module with eight independent analogue input channels that can receive input signals from up to eight separate analogue devices. Designed for use in industrial automation systems, the module is capable of processing voltage and current signals and converting these signals to digital data for further processing and analysis in a PLC (Programmable Logic Controller) or other control system.

Technical features

Multi-Channel Inputs: The IC200ALG260 module features eight single-ended analogue input channels that can be configured for voltage or current input modes. Voltage input ranges include -10VDC to +10VDC (bipolar) and 0VDC to 10VDC (unipolar), and current input ranges from 4mA to 20mA.

High Resolution: The module provides 12-bit resolution to accurately measure analogue input signals, ensuring data accuracy and reliability.

Internal power supply: The IC200ALG260 module operates without an external power supply; its internal power supply is provided by the backplane. However, in current mode, a separate power supply for the isolated inputs may be required.

Diagnostic Functions: The module has powerful diagnostic functions that detect under-range, over-range, open-circuit, power-down, non-volatile memory faults, and high or low alarms, and display them to the operator via LED indicators.

LED Indicators: The IC200ALG260 module is equipped with an internal power (INT PWR) LED and a normal (OK) LED to indicate the presence of internally generated field power and backplane power, respectively, in the analogue field side circuitry.

Hot-swap support: The module supports hot-swap functionality, which allows modules to be replaced or added while the system is running, without shutting down the entire system.

High Isolation: The module has a 250VAC continuous optical isolation rating and a 1500VAC continuous 1-minute optical isolation rating, providing high electrical isolation performance.

Application Areas

IC200ALG260 modules are widely used in industrial automation and process control, including but not limited to:

Manufacturing industry: In the manufacturing industry, the module can be used to receive analogue input signals from various sensors and actuators, such as temperature sensors, pressure sensors, flow sensors, etc., and convert these signals into digital data, which can be used for monitoring and controlling various parameters in the production process.

Chemical and petrochemical industry: In the chemical and petrochemical industry, the IC200ALG260 module can be used to receive analogue input signals from reactors, tanks and other equipment, and is used to monitor and control parameters such as temperature and pressure in chemical reactions and processes.

Energy industry: In the energy industry, the module can be used to receive analogue input signals from generators, transformers and other equipment for monitoring and controlling parameters such as voltage, current and power of the power system.

Product Specifications and Parameters

The following are some of the main specifications and parameters of the IC200ALG260 module:

Number of channels: 8 single-ended input channels

Voltage input range: -10VDC to +10VDC (bipolar), 0VDC to 10VDC (unipolar)

Current input range: 4mA to 20mA

Resolution: 12-bit

Update rate: 0.4 ms

Input filter response time: 5.0 ms

Power Consumption: 130 mA rated from a 5 volt bus voltage source (without transceiver)

LED Indicators: Internal Power LED and Normal LED

Dimensions: 4.3 x 2.63 x 1.956 inches

Compatibility: Compatible with PLC CPU firmware version 1.20 or higher

Installation and Maintenance

Environmental Conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety procedures:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.