Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA

F: | Au:FAN | DA:2025-04-27 | 978 Br: | 🔊 点击朗读正文 ❚❚ ▶ | Share:

ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA

Product Positioning

ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA is a 16-channel analog input module specially designed for industrial automation data acquisition, focusing on converting 4 - 20mA standard analog current signals into digital signals to provide accurate data support for PLC, DCS and other control systems, widely used in electric power, chemical industry, manufacturing industry and other industrial scenarios that require real-time monitoring of analog data. Widely used in electric power, chemical industry, manufacturing industry and other industrial scenarios that require real-time monitoring of analogue data, is an important component to achieve accurate control and efficient management of industrial automation.


Core Technical Parameters

Channel and Signal Parameters

Number of channels: 16 independent analog input channels, can simultaneously collect 16 4-20mA analog current signals to meet the demand for simultaneous monitoring of multiple parameters, suitable for multi-node data collection in complex industrial systems.

Signal type: only support 4 - 20mA current signal input, the signal has the advantages of strong anti-interference ability, long transmission distance, etc., commonly used in industrial field sensor signal transmission, such as pressure sensors, flow sensors and other equipment signal acquisition.

Resolution: 12-bit resolution, the input signal can be converted to 4096 (2^12) discrete digital values, the measurement accuracy can reach ± 0.1% of the full scale, to ensure the accuracy of data acquisition, can effectively capture the signal changes.


Performance Parameters

Sampling rate: each channel sampling rate of 500Hz, can quickly respond to signal changes, for dynamic changes in the analogue (such as real-time flow fluctuations in the pipeline) can be collected in a timely manner to provide real-time data for the control system support.

Input Impedance: The input impedance is less than 250Ω, which meets the standard requirement of 4-20mA current loop, ensuring the stability of current during signal transmission and reducing signal attenuation and interference.

Isolation characteristics: electrical isolation design between channels and between channels and systems, isolation voltage up to 500V AC, effectively preventing signal crosstalk and the spread of electrical faults, improve system stability and safety, especially for industrial sites with complex electromagnetic environments.


Communication and interface parameters

Communication protocol: support Modbus RTU, Profibus DP and other mainstream industrial communication protocols, which is convenient to integrate with different brands of controllers (e.g. ABB, Siemens, Schneider and other PLCs) and the host computer system, and realise rapid data transmission and interaction.

Communication interface: Equipped with RS485 interface (for Modbus RTU communication), DP interface (for Profibus DP communication), the interface adopts industrial-grade design, has good anti-interference ability, supports long-distance communication, and ensures stable data transmission.

Wiring: detachable terminal block wiring, each channel corresponds to an independent terminal, clear identification, easy to install, debug and maintain, support hot-swappable operation, can be replaced when the system is running the module, reduce downtime.


Mechanical and environmental parameters

Size and installation: compact design, width of only 25mm (standard rail mounting specifications), saving space in the control cabinet. Support 35mm DIN rail mounting, easy installation process, can be installed side by side with other modules to achieve flexible system expansion.

Protection grade: IP20, suitable for installation in indoor control cabinets and other places with good protection environment, can prevent solid foreign objects with a diameter of more than 12mm from entering, and avoid the accumulation of dust affecting the performance of the module.

Working environment: working temperature range - 40℃ - 70℃, storage temperature - 40℃ - 85℃, can adapt to harsh industrial environments; relative humidity 5% - 95% (non-condensing), with moisture-proof ability, high temperature, low temperature, humidity and other environments can still be stable operation.


Technical Advantages

High-precision data acquisition

Accurate signal conversion: With 12-bit high resolution and advanced A/D conversion technology, it can accurately convert 4-20mA analogue signals into digital signals, and with the auto-calibration function, it can periodically correct the measurement error to ensure stable long-term operation accuracy and provide a reliable data base for industrial control.

Low-noise design: Built-in digital filtering algorithm can effectively suppress high-frequency noise and interference in the signal, and different filter strengths, such as mean filter, median filter, etc., can be selected through the software configuration, so as to make the collected data smooth and stable, which is suitable for application scenarios with high requirements on signal quality.

Highly reliable operation

Redundancy and Failure Diagnosis: Some models support redundancy configuration, automatic switching of standby modules when the main module fails to ensure uninterrupted operation of the system; built-in self-diagnostic function, real-time monitoring of power supply, communication, channel status, faults through the indicator and communication protocols to provide rapid feedback, to facilitate rapid positioning and repair.

Anti-interference ability: adopting multi-layer circuit board layout and shielding technology, combined with isolation design, it can effectively resist the influence of electromagnetic interference and power grid fluctuation at industrial sites, and can still work stably in high electromagnetic environments such as metallurgy, chemical industry, etc., reducing the system failure rate.

Flexible and easy-to-use features

Convenient configuration management: Supporting special configuration software, the graphical interface can quickly set the channel parameters (such as range, filtering mode, alarm threshold), support batch configuration, improve debugging efficiency; support online modification of parameters, without interrupting the system operation.

Strong system compatibility: standardised communication protocols and interface design, can be seamlessly integrated into various industrial automation systems, whether it is a new project or an upgrade of the existing system, can be quickly accessed to reduce the cost and difficulty of system integration.


Application Fields

Power industry

Substation monitoring: It is used to collect analogue data such as current, voltage and power of power equipment, and transmit them to the monitoring system through 4-20mA signals to monitor the operation status of the substation in real time, and discover abnormal situations such as overload and short circuit in time to ensure the safe and stable operation of the power system.

Power plant control: In thermal and hydroelectric power plants, it collects parameters such as boiler pressure, steam flow, generator current, etc., and provides data for the DCS system, so as to achieve precise control of power generation process and optimise the efficiency of energy utilisation.

Chemical industry

Production process monitoring: connecting pressure sensors, temperature sensors, liquid level sensors and other equipment, collecting data such as reactor pressure, temperature, pipeline flow, real-time monitoring of the chemical production process to ensure stable reaction conditions and prevent safety accidents caused by abnormal parameters.

Environmental protection monitoring: It is used to monitor the key indicators of wastewater and waste gas treatment in chemical enterprises, such as the pH value of wastewater, COD content, and the concentration of waste gas pollutants, etc., to provide data support for environmental protection supervision and to ensure that the enterprise meets the emission standards.

Manufacturing

Automated production line: In automotive manufacturing, electronic assembly and other production lines, collect analogue quantities such as robot arm torque, conveyor belt tension, equipment temperature, etc., to achieve real-time monitoring of production line operation status and fault warning, and improve production efficiency and product quality.

Quality inspection: connecting inspection equipment, collecting analogue signals such as product size, weight, surface roughness, etc., judging product quality through data analysis, realizing automated quality inspection, reducing manual inspection errors and costs.


Precautions

Installation and wiring

Environmental requirements: should be installed in a dry, ventilated, non-corrosive gas control cabinet, away from strong electromagnetic interference sources and heat sources, to ensure that the normal operation of the module environmental temperature and humidity meet the requirements.

Wiring specification: Use shielded twisted pair cable to connect 4-20mA signal source, and ground the shield reliably; follow the identification of the terminal row to connect correctly, and distinguish between positive and negative poles of the power supply and the signal input channel; avoid parallel laying with power cables to prevent electromagnetic interference.

Use and maintenance

Parameter setting: Before using configuration software to set parameters, confirm that the signal source range is consistent with the module settings; regularly check the alarm threshold settings to ensure timely response to abnormal conditions.

Daily maintenance: Clean the dust on the surface of the module regularly; check the status of the indicator to determine whether the operation is normal; according to the frequency of use and environmental conditions, calibrate the module every 1 - 2 years to ensure the accuracy of measurement.

Comparison and supplement of other models

Performance upgrade models

ABB AI635: the same 16-channel design, but the resolution has been increased to 16 bits, with a measurement accuracy of ±0.05% F.S., and the sampling rate has been increased to 1000Hz, which is suitable for scientific research, precision processing and other fields that have very high requirements for accuracy and real-time performance.

ABB AI645: the number of channels is extended to 32 to meet the needs of large-scale data acquisition, support for more sensors to access, suitable for large-scale factory automation monitoring system.

Function expansion models

ABB AI625 - HART: AI625 based on the addition of HART communication protocol support, can communicate with HART intelligent instrumentation, instrument parameters to achieve remote configuration and diagnostics, suitable for oil, gas and other industries that require in-depth instrumentation management.

ABB AI625 - Isolated: Enhanced isolation performance, isolation voltage upgraded to 1000V AC, further improve the system anti-interference ability, suitable for complex electromagnetic environment, high security requirements of special industrial scenarios.

产品图片

  • Mannesmann Rexroth VT3006-36 Analog Amplifier Card
  • Bosch Rexroth R900086160 PGF1 Gear Pump
  • Bosch Rexroth R911173263 VDP15.3 Touch Display
  • Bosch Rexroth PPC-R22.1 RJ522 Industrial Controller
  • Bosch Rexroth MSK060C-0300-NN-S1-UG0-NNNN Servo Motor
  • Bosch Rexroth R911325068 NYS04.1 Controller
  • Bosch Rexroth R911335439 CSH01.1C Control Unit
  • Bosch Rexroth R917010287 BODAS RC10 Controller
  • Bosch Rexroth R911329791 CSH01.1C Drive Controller
  • Bosch Rexroth R182432310 Runner Block Guide
  • Bosch Rexroth VT-VSPA2-1-11 Amplifier Card R900021909
  • Bosch Rexroth MKD090B-047-KG1-KN Servo Motor
  • Bosch Rexroth LTU350 Servo Amplifier 0608750108
  • Bosch Rexroth 5610102050 Pneumatic Vacuum Regulator
  • Bosch Rexroth VT5041-23/3-OV PLC Control Board
  • Bosch Rexroth VT3015 S10/E Servo Amplifier Board
  • Bosch Rexroth MSK070D-0300-NN-M2-UG1 Servo Motor
  • Bosch Rexroth 3DREP6C-21 Valve R900955887
  • Bosch Rexroth R151244013 Ball Screw Bearing Unit
  • Bosch Rexroth MSM031C-0300 Servomotor R911325140
  • Bosch Rexroth EMD-B16.1-DC024N Box R911291681
  • Bosch Rexroth MKD071B-061-GP0-KN Servo Motor
  • Bosch Rexroth MSK030C-0900-NN-M1-UG1 Servo Motor
  • Bosch Rexroth EcoDrive DKC01.3-004-3-MGP-01 Servo Controller (299772)
  • Bosch Rexroth DKC02.3-040-7 EcoDrive Controller
  • Bosch Rexroth CLC-D02.3 CLC Motion Control Board
  • Bosch Rexroth HDS05.2-W300N Drive R911190019
  • Bosch Rexroth DKCXX.3-100-7 Servo Drive Unit
  • Bosch Rexroth CSE02.1A-S3-EC Control Unit R911339030
  • Bosch Rexroth MSK040C-0600-NN-S1-UP0 Servo Motor
  • Bosch Rexroth VT3013 S36 R5 Circuit Board Card
  • Bosch Rexroth VT3000-36A Amplifier Card R90020298
  • Bosch Rexroth VPB40.3 IndraControl Module R911374113
  • Bosch Rexroth HCS02.1E-W0054-A-03-NNNN Converter with R911332574 Control Unit
  • Bosch Rexroth MHD071B-061-PG1-UN Servo Motor
  • Bosch Rexroth A2F5/60W-B3-S Piston Motor R909418904
  • Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-NN-NN-NN-FW IndraDrive Cs Converter
  • Bosch Rexroth 4WRPEH 6 C4B40P-2X/G24K0/A1M Proportional Directional Valve (0 811 404 647)
  • Bosch Rexroth R911405975 ctrlX OS PLC Controller
  • Bosch Rexroth CSB02.1B-ET-EC-NN-S4-NN-NN-FW Servo Control Card R911338543
  • Rexroth MSK050B-0300-NN-M1-UG0-NNN Servo Motor
  • Rexroth IndraControl VEPXX.5-ATOM Set R911374889 Panel
  • Rexroth 1070089906-GC1 1070089907-201 Board
  • Rexroth CSB01.1C-SE-ENS-EN2-NN-S-NN-FW Control Unit
  • Rexroth MKD071B-024-KG3-KN Servo Motor
  • Rexroth Indramat DKC02.3-040-7-FW Controller
  • Rexroth HCS02.1E-W0028-A-03-NNNN Servo Module
  • Rexroth HMD01.1N-W0036-A-07-NNNN Drive Module
  • Rexroth MSK050C-0600-NN-M1-UG0-NNN Servo Motor
  • Rexroth DKC02.3-040-7-FW Servo Controller
  • Bosch Rexroth VT-5014S30-R1 Amplifier Card
  • Bosch Rexroth MSK040C-0600-NN-M1-UG1 Servo Motor
  • Bosch Rexroth MKD071B-061-GG0-KN Servo Motor
  • Bosch Rexroth VT5012-S45-R1 Amplifier Card
  • Bosch Rexroth SHL03.1-NNN-S-NNN Encoder Module
  • Bosch Rexroth EFC3600-0K75 Frequency Converter
  • Bosch Rexroth VFC3610-1K50-3P4-MNA-7P-NNNNN-NNNN 1.5kW Frequency Inverter
  • Bosch Rexroth EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN 2.2kW Frequency Converter
  • Bosch Rexroth XM21 XM2100.01 PLC Control Unit
  • Rexroth CSH01.1C-ET-ENS R911328178 HMS01.1N-W0020 Drive Package
  • April AXI0010 - Single Axis Servo Controller
  • Rexroth DKC10.3-004-3-MGP-01VRS Servo Drive
  • Bosch DKC02.3-040-7-FW Servo Drive
  • Rexroth DKC06.3-040-7-FW Servo Drive Controller
  • Rexroth VPB40.3 SE T R911374113 Control Module
  • Rexroth S20-SSI-AO-1/1 R911172544-AB1 Module
  • Rexroth R911173004 AC1 GH1 PLC Control Set
  • Rexroth VPB40.3D1L-1G0NN-D1D-DN-NN-FW Module
  • Rexroth MDD071B-N-040-N2T-095GB1 Servo Motor
  • Bosch Rexroth DM15K1101-D Servo Drive Module
  • Rexroth CSH01.3C-PB-ENS-MA1-CCD-S2-S-NN-FW Drive
  • Rexroth HMS01.1N-W0036 CSB02.1B Drive Package
  • Rexroth MSK070E-0300-NN-M2-UG0-RNN Servo Motor
  • Rexroth AZPF-1X-004RCB20KB Gear Pump
  • Rexroth NFD03.1-480-055 Powerline Filter
  • Rexroth VT-VARAP1-537-20/V0 Valve Amplifier
  • Rexroth HVE04.2-W075N Supply Module
  • Rexroth HMD01.1N-W0020-A-07-NNNN Drive Controller
  • Rexroth VDP40.3DIN-D1-NN-CG HMI Computer
  • Rexroth HDS05.2-W300N-HS12-01FW Drive Module
  • Rexroth HMS01.1N-W0070-A-07-NNNN Power Section
  • Rexroth Indramat MKD071B-061-GP0-KN Servo Motor
  • Rexroth HDS03.2-W075N-HS12-01-FW Control Unit
  • Rexroth HCS02.1E-W0054-A-03-NNNN Servo Drive
  • Rexroth CML40.2-SP-330-NA-NNNN-NW IndraControl
  • Rexroth CSH01.1C-PB-ENS-NNN-MA1-S2-S-NN-FW Drive
  • Rexroth PPC-R22.1 DAQ03 Servo Drive
  • Rexroth HCS02.1E-W0070-A-03-NNNN Servo Drive
  • Rexroth RF-FLS PB M12 DIO 8/8 M12 Module
  • Rexroth Indramat TBM 1.2-40-W1-024 Servo Bleeder
  • Rexroth Indramat MKD071B-061-KG1-KN Servo Motor
  • Rexroth CML40.2-SP-330-NA-NNNN-NW IndraControl L40
  • Rexroth VCP08.2DTN-003-NN-NN-PW Operator Panel
  • Bosch Rexroth DM30K1101-D Servo Drive 670V DC
  • Rexroth PPC-R22.1N-N-Q1-NN-NN-FW Motion Controller
  • Rexroth MSK040C-0600-NN-M1-UG1-NNNN Servo Motor
  • Rexroth CSH01.1C-S3-ENS-NNN-NNN-S2-S-NN-FW Drive Controller
  • Rexroth PPC-R22.1 Motion Control Module 004566384
  • Rexroth CSH01.1C-PB-ENS-NNN-MA1-S2-S-NN-FW Controller
  • Rexroth CML25.1-3N-400-NN-NNC1-NW IndraControl L25
  • Rexroth MSK030C-0900-NN-M1-UP1-NSNN Servo Motor
  • Rexroth HCS02.1E-W0028-A-03 CSH01.1C-PB Drive Package
  • Bosch Rexroth VT-VARAP 1-537-20/V0 Amplifier
  • Bosch Rexroth PPC-R02.2N R911285402 Control Unit
  • National Instruments PCI-7342 Motion Controller
  • National Instruments PXIe-6535 Digital I/O Module
  • National Instruments PCIe-6738 Analog Output Card
  • National Instruments NI-6583 Digital I/O Adapter Module
  • National Instruments NI TB-9214 Terminal Block
  • National Instruments NI 9222 Simultaneous Analog Input Module
  • National Instruments PXIe-8364 MXI-Express Module
  • National Instruments PXI-8185 Embedded Controller
  • National Instruments PCI-1405 Device
  • National Instruments SCXI-1160 Module
  • National Instruments PCI-MIO-16E-1 Device
  • National Instruments USB-6216 Device
  • National Instruments PXIe-2543 Module
  • National Instruments PCI-5102 Digitizer
  • National Instruments PXI-6284 DAQ Device
  • National Instruments PXI-7330 Controller
  • National Instruments cFP-2100 Controller
  • National Instruments USB-6002 DAQ Device
  • National Instruments PCIe-6374 Multifunction DAQ Card
  • National Instruments PXIe-4610 Power Amplifier Module
  • National Instruments PXIe-4154 Battery Simulator
  • National Instruments PXIe-7858R Reconfigurable I/O Module
  • National Instruments BNC-2090A BNC Terminal Block
  • National Instruments cRIO-9066 CompactRIO Controller