GE V7768-322001 350-9301007768-322001 A2 Single Board Computer

GE V7768-322001 350-9301007768-322001 A2 Single Board Computer

DESCRIPTION

The V7768 is a VMEbus single board computer from GE Fanuc Intelligent Platforms, offering up to 2.16 GHz of processing speed via the Intel Core 2 Duo processor with up to 2 Gbyte DDR2 SDRAM. This board integrates the Intel 945GME Express Chipset and offers a very rich I/O set, making this a very flexible addition to our expansive line of Intel architecture VME SBCs. I/O options include dual Gigabit Ethernet, two SATA interfaces, four USB 2.0 ports, keyboard/mouse/SVGA on the front panel, as well as a PCI-X capable PMC site. The V7768 also offers a Celeron® M processor option that allows for 20 more degrees on the upper operating temperature limit.

FEATURES

• Intel Core 2 Duo processor up to 2.16 GHz 

• Up to 4 Mbyte L2 cache 

• Up to 2 Gbyte DDR2 SDRAM via single SODIMM 

• 667 MHz system and memory bus 

• Up to 8 Gbyte bootable CompactFlash 

• One PCI-X PMC expansion site 

• Board-to-board connection for PMC237CM1/V PMC expansion board 

• 2x Gigabit Ethernet on the front panel 

• 2x Serial ports 

• 4x USB 2.0 ports 

• 2x SATA  

• PS/2 keyboard/mouse on the front panel 

• Operating System Support for Windows® XP, VxWorks®, and Linux®

SPECIFICATIONS

Processor 

• Intel Core 2 Duo Processor at 2.16 GHz 

• Intel Celeron M Processor at 1.07 GHz 

• 4 Mbyte cache (Core 2 Duo options), and 1 Mbyte (Celeron M option) 

• 667 MHz system and memory bus on the Core 2 Duo options, 533 MHz system and memory bus on the Celeron M option SDRAM 

• Maximum memory configuration of 2 Gbyte DDR2 SDRAM via single SODIMM Compact Flash 

• CompactFlash up to 8 Gbyte accessible through secondary IDE port 

• CompactFlash may be configured as the boot device through the BIOS boot device set-up BIOS 

• The V7768 System BIOS and Video BIOS are provided in reprogrammable flash memory. 

Ethernet 

• Dual Gigabit Ethernet interface via the Intel 82571 

• Both ports are routed to front panel RJ45 connectors 

• Network boot via PXE USB Ports 

• Four USB 2.0 ports: two to rear I/O via P2, and two to front panel 

• Supported USB features include - isochronous data transfers - asynchronous messaging - self-identification and configuration of peripherals - dynamic (hot) attachment VMEbus Backplane Interface 

• Tundra Universe II supporting VME64 modes: A32/A24/D32/D08(EO)/MBLT64/BLT32 

• Hardware byte swapping 

• Enhanced bus error handling

Installation and Maintenance

Environmental Conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety regulations:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.