How to avoid the risk of open-pit mining, 24 prevention and control points to ensure production safety

In order to prevent water accumulation in the substation during the flood control period, it is necessary to check and dredge the parts that may have water accumulation. For example, drainage equipment, basements, cable channels, etc., complete the flood control and drainage work, and after the end of the flood control, the above parts need to be carefully checked to achieve timely drainage, when the humidity is large, you need to maintain the ventilation of the substation.

③ Strengthen fire management to prevent the damage caused by fire to the substation. Post fire signs and fire emergency measures at the prominent locations of substations. Check the fire fighting equipment regularly to ensure normal use, and prohibit stacking other items around the fire fighting equipment, and prohibit stacking explosive and flammable items in the substation. Set up a fire box for the fire fighting equipment installed in the outdoor: at the same time, it is necessary to discharge the waste oil in the substation into the corresponding container in accordance with the relevant regulations and standards, and cannot be discharged and stored anywhere, to ensure that there is no oil accumulation in the cable trench, to prevent the occurrence of fire and other events in the cable, and it is necessary to carry out fire operation in strict accordance with the fire standard.