Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

POY and FDY oil ingredients

F: | Au:佚名 | DA:2023-11-29 | 1115 Br: | 🔊 点击朗读正文 ❚❚ ▶ | Share:

Chemical fiber oil agent is mainly composed of smoothing and softening agent, bunching agent, antistatic agent, emulsifier, balance regulator and so on. In the process of preparation of oil agent, it is difficult to adapt to the requirements of various aspects by relying on a single surfactant, so different types of surfactants must be mixed together to complement each other and play its coordination effect.

1. Smoothing agent (lubricant)

The main function of the smoothing agent is to reduce friction, improve the strength of the oil film, protect the fiber, and prevent the wear and rust of the fiber on the equipment. Smoothness is essentially the friction characteristics of the oil agent, which is commonly expressed by the static friction coefficient (μS) and dynamic friction coefficient (μd) between the wire and the wire (F/F), the wire and the metal (F/M) and the wire and the rubber (F/R) after oiling. It is usually determined by the Raeder test. The oil film strength was tested by MRS 10 four-ball friction and wear test machine. The oil film strength is high and the friction coefficient fluctuation is small.

The smoothing agent generally selects mineral oil, vegetable oil, fatty acid mono alcohol ester, polyol ester, fatty acid double ester, fatty acid polyol ester, fatty acid trimethylol propyl ester, fatty acid pentaerythritol ester, etc. Industrial white oil is widely used as a smoothing agent in chemical fiber oil. However, due to its poor heat resistance, volatile at high temperature, poor oil film strength, its use in high-speed spinning such as POY is limited. Synthetic ester is the main smoothing agent for one step process FDY, industrial filament and other oils, and its performance is superior to that of natural mineral oil. They have the advantages of low volatility, strong oxidation resistance, low freezing point, good viscosity and temperature, high compatibility and easy emulsification. The smoothing agent generally accounts for 40% to 60% in the filament oil formulation, and the proportion is higher in the finished oil. There are many smoothing agents in the oil, and the smoothness of the fiber is good, but it increases the difficulty of preparing the emulsion.

1.1 Mineral oil

Liquid alkanes: such as liquid paraffin is generally a mixture of moderate molecular weight alkanes and cycloalkanes. According to the difference in viscosity, it is divided into different grades. The viscosity of mineral oil increases with the increase of molecular weight and the thermal stability increases with the increase of molecular weight. Because mineral oil has the characteristics of low price, good smoothness at low temperature, good sizing, etc., it is widely used in all kinds of ordinary spinning oil, the amount ranges from 5-50%, and even more than 80% in winding oil. However, because of its poor heat resistance, volatile at high temperature, it can not play its due lubrication role, coupled with the poor strength of the oil film, the use of high temperature and high speed spinning process is limited.

Solid alkanes: such as solid paraffin also has many kinds, its molecular composition is mostly large molecules of alkanes. Because it is solid at room temperature, it is generally not used for chemical fiber oil agents, and is only used as an additive in high-strength industrial silk or cord oil agents in a small amount to improve the oil film strength of the oil agent.

1.2 Esters

Esters can be divided into natural oils and synthetic esters.

A. Natural oil: It is composed of triglycerides of advanced fatty acids. This kind of smoothing agent can be listed as coconut oil, soybean oil, peanut oil, corn oil and lard, etc., with the decrease of viscosity, its degree of unsaturation increases, due to its low price, good smoothness, less smoke, high film strength, often used with other smoothing agents in various types of chemical fiber oil agents other than POY oil, but because its molecules contain double bonds, oxidation stability is poor. Easy coking, as well as poor sizing, the dosage is generally controlled within 8%.

B, synthetic ester: generally by various alcohols and advanced fatty acids through condensation esterification, transesterification and other ways to prepare. Commonly used alcohols can be listed as octanol, dodecyl alcohol, octadecyl alcohol, ethylene glycol, polyethylene glycol, glycerol, trimethylol propane, pentaerythritol, sorbitol and other monols and polyols, and advanced fatty acids from the source of raw materials, generally choose below octadecyl (including octadecyl) monic acid and polyacid. According to the needs can be made into different uses of single ester, double ester and polyester. Spinning oil special synthetic ester products call 178-6356-0108

1.3 Polyether

Polyether usually refers to the polymerization of ethylene oxide (EO) and propylene oxide (PO) under different starting agents to obtain polymer compounds. Starting agent multi-purpose alcohols, such as primary alcohols, polyalcohols, etc. Due to different starting agents, different ratios of EO and PO, different polymerization methods and different molecular weights, a wide range of polyether compounds have been formed. POY spinning process for the oil agent required these characteristics, is other than polyether smoothing agents can not be done, so the amount of polyether in POY chemical fiber oil agent up to 70%. From the perspective of molecular structure, polyether molecules are hydrophilic with alkyl group at one end and alcohol hydroxyl group at the other end. The oxygen atoms in the ether group are easy to form hydrogen bonds with water, so most polyethers are easily soluble in water. Although the ratio of PO can be increased to increase the lipophilicity and improve its smoothness, it is still limited. In oils with high smoothness requirements, such as FDY oils, polyether is often used in combination with Taisen ester to make up for its lack of smoothness.

  • Mannesmann Rexroth VT3006-36 Analog Amplifier Card
  • Bosch Rexroth R900086160 PGF1 Gear Pump
  • Bosch Rexroth R911173263 VDP15.3 Touch Display
  • Bosch Rexroth PPC-R22.1 RJ522 Industrial Controller
  • Bosch Rexroth MSK060C-0300-NN-S1-UG0-NNNN Servo Motor
  • Bosch Rexroth R911325068 NYS04.1 Controller
  • Bosch Rexroth R911335439 CSH01.1C Control Unit
  • Bosch Rexroth R917010287 BODAS RC10 Controller
  • Bosch Rexroth R911329791 CSH01.1C Drive Controller
  • Bosch Rexroth R182432310 Runner Block Guide
  • Bosch Rexroth VT-VSPA2-1-11 Amplifier Card R900021909
  • Bosch Rexroth MKD090B-047-KG1-KN Servo Motor
  • Bosch Rexroth LTU350 Servo Amplifier 0608750108
  • Bosch Rexroth 5610102050 Pneumatic Vacuum Regulator
  • Bosch Rexroth VT5041-23/3-OV PLC Control Board
  • Bosch Rexroth VT3015 S10/E Servo Amplifier Board
  • Bosch Rexroth MSK070D-0300-NN-M2-UG1 Servo Motor
  • Bosch Rexroth 3DREP6C-21 Valve R900955887
  • Bosch Rexroth R151244013 Ball Screw Bearing Unit
  • Bosch Rexroth MSM031C-0300 Servomotor R911325140
  • Bosch Rexroth EMD-B16.1-DC024N Box R911291681
  • Bosch Rexroth MKD071B-061-GP0-KN Servo Motor
  • Bosch Rexroth MSK030C-0900-NN-M1-UG1 Servo Motor
  • Bosch Rexroth EcoDrive DKC01.3-004-3-MGP-01 Servo Controller (299772)
  • Bosch Rexroth DKC02.3-040-7 EcoDrive Controller
  • Bosch Rexroth CLC-D02.3 CLC Motion Control Board
  • Bosch Rexroth HDS05.2-W300N Drive R911190019
  • Bosch Rexroth DKCXX.3-100-7 Servo Drive Unit
  • Bosch Rexroth CSE02.1A-S3-EC Control Unit R911339030
  • Bosch Rexroth MSK040C-0600-NN-S1-UP0 Servo Motor
  • Bosch Rexroth VT3013 S36 R5 Circuit Board Card
  • Bosch Rexroth VT3000-36A Amplifier Card R90020298
  • Bosch Rexroth VPB40.3 IndraControl Module R911374113
  • Bosch Rexroth HCS02.1E-W0054-A-03-NNNN Converter with R911332574 Control Unit
  • Bosch Rexroth MHD071B-061-PG1-UN Servo Motor
  • Bosch Rexroth A2F5/60W-B3-S Piston Motor R909418904
  • Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-NN-NN-NN-FW IndraDrive Cs Converter
  • Bosch Rexroth 4WRPEH 6 C4B40P-2X/G24K0/A1M Proportional Directional Valve (0 811 404 647)
  • Bosch Rexroth R911405975 ctrlX OS PLC Controller
  • Bosch Rexroth CSB02.1B-ET-EC-NN-S4-NN-NN-FW Servo Control Card R911338543
  • Rexroth MSK050B-0300-NN-M1-UG0-NNN Servo Motor
  • Rexroth IndraControl VEPXX.5-ATOM Set R911374889 Panel
  • Rexroth 1070089906-GC1 1070089907-201 Board
  • Rexroth CSB01.1C-SE-ENS-EN2-NN-S-NN-FW Control Unit
  • Rexroth MKD071B-024-KG3-KN Servo Motor
  • Rexroth Indramat DKC02.3-040-7-FW Controller
  • Rexroth HCS02.1E-W0028-A-03-NNNN Servo Module
  • Rexroth HMD01.1N-W0036-A-07-NNNN Drive Module
  • Rexroth MSK050C-0600-NN-M1-UG0-NNN Servo Motor
  • Rexroth DKC02.3-040-7-FW Servo Controller
  • Bosch Rexroth VT-5014S30-R1 Amplifier Card
  • Bosch Rexroth MSK040C-0600-NN-M1-UG1 Servo Motor
  • Bosch Rexroth MKD071B-061-GG0-KN Servo Motor
  • Bosch Rexroth VT5012-S45-R1 Amplifier Card
  • Bosch Rexroth SHL03.1-NNN-S-NNN Encoder Module
  • Bosch Rexroth EFC3600-0K75 Frequency Converter
  • Bosch Rexroth VFC3610-1K50-3P4-MNA-7P-NNNNN-NNNN 1.5kW Frequency Inverter
  • Bosch Rexroth EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN 2.2kW Frequency Converter
  • Bosch Rexroth XM21 XM2100.01 PLC Control Unit
  • Rexroth CSH01.1C-ET-ENS R911328178 HMS01.1N-W0020 Drive Package
  • April AXI0010 - Single Axis Servo Controller
  • Rexroth DKC10.3-004-3-MGP-01VRS Servo Drive
  • Bosch DKC02.3-040-7-FW Servo Drive
  • Rexroth DKC06.3-040-7-FW Servo Drive Controller
  • Rexroth VPB40.3 SE T R911374113 Control Module
  • Rexroth S20-SSI-AO-1/1 R911172544-AB1 Module
  • Rexroth R911173004 AC1 GH1 PLC Control Set
  • Rexroth VPB40.3D1L-1G0NN-D1D-DN-NN-FW Module
  • Rexroth MDD071B-N-040-N2T-095GB1 Servo Motor
  • Bosch Rexroth DM15K1101-D Servo Drive Module
  • Rexroth CSH01.3C-PB-ENS-MA1-CCD-S2-S-NN-FW Drive
  • Rexroth HMS01.1N-W0036 CSB02.1B Drive Package
  • Rexroth MSK070E-0300-NN-M2-UG0-RNN Servo Motor
  • Rexroth AZPF-1X-004RCB20KB Gear Pump
  • Rexroth NFD03.1-480-055 Powerline Filter
  • Rexroth VT-VARAP1-537-20/V0 Valve Amplifier
  • Rexroth HVE04.2-W075N Supply Module
  • Rexroth HMD01.1N-W0020-A-07-NNNN Drive Controller
  • Rexroth VDP40.3DIN-D1-NN-CG HMI Computer
  • Rexroth HDS05.2-W300N-HS12-01FW Drive Module
  • Rexroth HMS01.1N-W0070-A-07-NNNN Power Section
  • Rexroth Indramat MKD071B-061-GP0-KN Servo Motor
  • Rexroth HDS03.2-W075N-HS12-01-FW Control Unit
  • Rexroth HCS02.1E-W0054-A-03-NNNN Servo Drive
  • Rexroth CML40.2-SP-330-NA-NNNN-NW IndraControl
  • Rexroth CSH01.1C-PB-ENS-NNN-MA1-S2-S-NN-FW Drive
  • Rexroth PPC-R22.1 DAQ03 Servo Drive
  • Rexroth HCS02.1E-W0070-A-03-NNNN Servo Drive
  • Rexroth RF-FLS PB M12 DIO 8/8 M12 Module
  • Rexroth Indramat TBM 1.2-40-W1-024 Servo Bleeder
  • Rexroth Indramat MKD071B-061-KG1-KN Servo Motor
  • Rexroth CML40.2-SP-330-NA-NNNN-NW IndraControl L40
  • Rexroth VCP08.2DTN-003-NN-NN-PW Operator Panel
  • Bosch Rexroth DM30K1101-D Servo Drive 670V DC
  • Rexroth PPC-R22.1N-N-Q1-NN-NN-FW Motion Controller
  • Rexroth MSK040C-0600-NN-M1-UG1-NNNN Servo Motor
  • Rexroth CSH01.1C-S3-ENS-NNN-NNN-S2-S-NN-FW Drive Controller
  • Rexroth PPC-R22.1 Motion Control Module 004566384
  • Rexroth CSH01.1C-PB-ENS-NNN-MA1-S2-S-NN-FW Controller
  • Rexroth CML25.1-3N-400-NN-NNC1-NW IndraControl L25
  • Rexroth MSK030C-0900-NN-M1-UP1-NSNN Servo Motor
  • Rexroth HCS02.1E-W0028-A-03 CSH01.1C-PB Drive Package
  • Bosch Rexroth VT-VARAP 1-537-20/V0 Amplifier
  • Bosch Rexroth PPC-R02.2N R911285402 Control Unit
  • National Instruments PCI-7342 Motion Controller
  • National Instruments PXIe-6535 Digital I/O Module
  • National Instruments PCIe-6738 Analog Output Card
  • National Instruments NI-6583 Digital I/O Adapter Module
  • National Instruments NI TB-9214 Terminal Block
  • National Instruments NI 9222 Simultaneous Analog Input Module
  • National Instruments PXIe-8364 MXI-Express Module
  • National Instruments PXI-8185 Embedded Controller
  • National Instruments PCI-1405 Device
  • National Instruments SCXI-1160 Module
  • National Instruments PCI-MIO-16E-1 Device
  • National Instruments USB-6216 Device
  • National Instruments PXIe-2543 Module
  • National Instruments PCI-5102 Digitizer
  • National Instruments PXI-6284 DAQ Device
  • National Instruments PXI-7330 Controller
  • National Instruments cFP-2100 Controller
  • National Instruments USB-6002 DAQ Device
  • National Instruments PCIe-6374 Multifunction DAQ Card
  • National Instruments PXIe-4610 Power Amplifier Module
  • National Instruments PXIe-4154 Battery Simulator
  • National Instruments PXIe-7858R Reconfigurable I/O Module
  • National Instruments BNC-2090A BNC Terminal Block
  • National Instruments cRIO-9066 CompactRIO Controller