Foxboro ™ I/A Series Model H90 Workstation Server

1. Basic configuration and optional extensions

Configuration Category Basic Configuration Optional Extension

Processor Intel Xeon 5650 dual CPU configuration (requires corresponding motherboard)

4GB ECC DDR-3 SDRAM expandable to 12GB (single CPU)/24GB (dual CPU)

Store one 300GB internal hard drive and up to eight 300GB hard drives per SATA CD-RW/DVD drive; RAID1/RAID5 array+hot spare disk

Graphics card dual port DisplayPort/DVI PCIe graphics card (up to 1600 × 1200 resolution) dual/four port graphics card (analog/digital, up to 1920 × 1080 resolution)

Four integrated 10/100/1000Base-T Ethernet ports on the network; Dual PCIe Ethernet network card (Mesh network) with additional copper/fiber Ethernet adapter card

2 USB ports in front and 2 ports behind the peripheral interface; 1 serial interface (GCIO/printer); VGA video port dual serial/single parallel port card; GCIO interface module (up to 2); USB hub

The monitor supports 19/20.1/23/40 inch LCD monitors with USB touch screens (up to 4 units); RGU Remote Graphics Unit

2. Remote Graphics Unit (RGU) specifications

RGU is the core remote extension component of H90 server, used to achieve remote separation and deployment of peripherals and servers. The key parameters are as follows:

Specific specifications of RGU parameters

Model Options: Dual Port Kit (P0928DU), Four Port Kit (P0928DV)

Component RGU unit (P0928DS), PCIe adapter card (P0928DT), 15m LC/LC fiber patch cord (P0972TP)

Transmission distance -62.5/125 μ m multimode fiber: up to 70m;

-50/125 μ m multimode fiber: up to 150m;

-Single mode 9/125 μ m fiber: up to 1000m (user provided)

Interface capability: 5 USB 2.0 ports (including 1 BIOS level keyboard port), 4 DisplayPort video ports, audio input/output/microphone interfaces

Environmental adaptation working temperature 0-55 ℃, relative humidity 20% -80% (no condensation), anti vibration meets NEBS Level 3 (earthquake zone 4)

Environmental and Compliance Specifications

1. Environmental parameters

Environment category, operating conditions, storage conditions

The temperature ranges from 10-35 ℃ (50-95 ℉), and for every 305m increase in altitude, the upper temperature limit decreases by 1 ℃ (up to 3050m) -30-60 ℃ (-22-140 ℉)

Relative humidity 10% -90% (non condensing), wet bulb temperature ≤ 28 ℃ 5% -95% (non condensing), wet bulb temperature ≤ 38.7 ℃

Vibration operation: 0.26G (5-350Hz); Storage: 1.54G rms (10-250Hz)

Impulse operation: 31G half sine impulse (2.6ms); Storage: 71G half sine shock (2ms), 27G square wave shock

The pollution level complies with ISA S71.04 Class G1 (mild pollution) and is suitable for ordinary industrial environments

2. Compliance certification

Specific standards for certification categories

Safety Certification - United States: UL ®  1950；

-Canada: CSA ®  C22.2 No. 60950-1；

-EU: TUV EN60950-1

Electromagnetic Compatibility (EMC) - Canada: ICES Class A;

-EU: CE EN55022 Class A, EN55024, EN61000-3-2/3;

-Laser safety: 850nm laser complies with 21CFR Subpart J Class 1

Industrial security standards support NERC CIP compliance and meet industrial control network security requirements through McAfee security suite

Installation and deployment requirements

1. Physical installation

Rack specifications: 2U height rack mounted design, standard rail kit, to be installed in commercial cabinets with a depth of ≥ 1000mm (39.4in) (ensuring front and rear ventilation and cable space), not compatible with Invensys standard industrial cabinets (such as Industrial Enclosure 32).

Cooling requirements: The cabinet should provide sufficient ventilation to ensure that the internal ambient temperature does not exceed 35 ℃ (95 ℉), to avoid fan failure or performance degradation caused by high temperatures.

Remote deployment: Remote separation of servers and peripherals can be achieved through RGU, with displays directly connected up to 100ft (approximately 30m) and RGU fiber optic connections up to 150m (50/125 μ m fiber optic).

2. Domain controller configuration

If centralized security management (such as user authentication and policy distribution) needs to be enabled, one H90 needs to be configured as the primary domain controller (running Microsoft Active Directory), and it is recommended to pair it with one backup domain controller (to avoid single point of failure).

The domain controller needs to be dedicated and cannot run I/A Series/FCS applications or remote desktop services. Only McAfee ePolicy Orchestrator deployment is allowed.

The system defaults to creating organizational units (OUs), security groups, and group policies. For detailed configuration, please refer to the "Security Enhancements User's Guide" (B0700ET).