ABB FF HSE communication module

ABB FF HSE communication module

The ABB FF HSE communication module is a crucial device in industrial automation systems, enabling efficient and reliable communication. Take the CI860K01 3BSE032444R1 and LD800HSE EX as examples, here is an introduction:

CI860K01 3BSE032444R1

Basic Information7: The CI860K01 3BSE032444R1 is an FF HSE interface module of ABB, designed for control systems like the AC 800M. It consists of a CI860 communication interface and a TP860 baseboard. The CI860 communication interface supports redundancy mode. Up to 12 CI860 modules can be placed on one AC800M, and each module can be connected to the same or separate FOUNDATION Fieldbus HSE subnets.

Technical Specifications7: Its operating voltage and load resistance are within certain standard ranges. It should work in an environment with a temperature of -10°C to 50°C and a humidity of 20% to 95%. Its instruction list, a programming language designed for PLCs, is supported by the IEC 61131-3 standard.

Functions

Data Transmission and Reception: It can transmit various types of data between field devices and control systems through Ethernet7. It also receives data from other devices and parses them into a readable format.

Protocol Support: The module supports multiple communication protocols, enabling efficient data exchange with a variety of devices and systems7.

Applications: It is mainly used for sequential control in industrial process control. Due to its closed-loop control function, it can also be used for the control of new PLCs7.

LD800HSE EX9

Basic Information: The LD800HSE EX is a highly compact gateway that connects four FF H1 links to FF HSE, suitable for redundant use. It is powered by 24 Vdc and supports 10 Mbit/s and 100 Mbit/s Ethernet.

Technical Specifications

Certifications: It is certified for decentralized installation in hazardous areas Zone 2/Division 2 - cULus Class I Division 2 Groups A, B, C, D - IECEx Ex nA IIC T4 Gc - ATEX II 3G Ex nA IIC T4 Gc. Its G3 coating complies with ANSI/ISA7104 and EN 60068-2-60.

Dimensions and Weight: It measures 47 x 131 x 111 mm and weighs about 0.4 kg.

Functions

Device Recognition: It can identify devices connected to the H1 link.

Configuration and Access: It can configure connected H1 devices through HSE system management and network management, and access the function blocks of connected H1 devices via HSE.

Data Redistribution: It can republish process data between H1 links and between H1 and HSE.

Alarm and Event Distribution: It distributes alarms and events sent by H1 devices.