IS2020RKPSG3A | General Electric Mark VI VME Rack Power Supply

IS2020RKPSG3A | General Electric Mark VI VME Rack Power Supply

Product Description P/N: IS2020RKPSG3ADESCRIPTION / SPECIFICATIONSDescriptionThe IS2020RKPSG3A operates as a VME Rack Power Supply within the Mark VI system. The Mark VI is part of the Speedtronic series of steam and gas turbine management systems developed by GE. This series spans from the Mark I system introduced in the late 1960s to the Mark VI and Mark VIe systems released in the 1990s.Technical SpecificationsCondition New Never Used SurplusPart # A06B-6110-H006Category Servo ProductsSubcategory CNC ConverterWeight 8.62 lbsDescription SERVO POWER CONVERTERType POWER SUPPLY MODULE PSM-5.5IModel ALPHA I POWER SUPPLY MODEL PSM-5.5ICurrent Rating 26 AMPPhase 3 PHASEInput Voltage 200/240 VFrequency 50/60 HZApplication CNCInformation About IS2020RKPSG3AThe IS2020RKPSG3A functions as a VME Rack Power Supply within the Mark VI system. The Mark VI is among the final iterations of Speedtronic steam or gas turbine management systems developed and released by GE. 

The lineage of this turbine management series extends from the late 1960s with the introduction of the Mark I system, continuing through the 1990s with the release of the Mark VI and its successor, the Mark VIe. The Mark VI system can be configured in either Simplex or TMR (triple modular redundant) form. It is constructed around a central Control Module, which connects to termination boards that receive inputs from other boards within the system. The Control Module also interfaces with an Operator Interface, or HMI, which provides access to system data via a Windows platform.Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included