GE DS200DCFBG2BNC MRP420024 DC Feedback Board

GE DS200DCFBG2BNC MRP420024 DC Feedback Board

Core functions and roles

As the "signal bridge" of the DC speed regulation system, the core function of this feedback board revolves around the full process processing of DC signals, including the following three aspects:

1. Accurate acquisition of DC signals: Through onboard BNC interfaces and dedicated signal acquisition circuits, key operating parameters such as speed, current, and voltage of DC motors or related actuators are captured in real time, with an acquisition accuracy of industrial grade 0.1%, ensuring the authenticity and integrity of the original signals and providing reliable data sources for system control decisions.

2. Signal conditioning and optimization: In response to common issues such as electromagnetic interference and signal attenuation in industrial sites, built-in filtering circuits and signal amplification modules are used to denoise, stabilize, and adjust the amplitude of the collected raw signals. Irregular signals are converted into standardized DC signals that comply with control system standards, avoiding system misjudgment caused by interference signals.

3. High speed feedback transmission: Using GE's dedicated data transmission protocol, the conditioned standard signal is quickly transmitted to the system's main control unit with a feedback delay of less than 10ms, ensuring that the main control unit can grasp the equipment's operating status in real time and adjust control instructions in a timely manner based on the feedback signal, achieving closed-loop precise speed regulation of the DC motor.

Key technical parameters

Input signal

DC voltage 0-10V/DC current 4-20mA

Compatible with commonly used industrial standard feedback signal types and compatible with multiple sensors

output signal

DC voltage 0-5V/TTL level signal

Match the signal input requirements of GE Mark VI and other main control systems

working power supply

DC 24V ±10%

Wide voltage range design to adapt to power fluctuations in industrial sites

Operating Temperature

-10℃ ~ 60℃

Satisfy stable operation under harsh working conditions such as high and low temperatures

interface type

2 BNC interfaces (signal input), 1 terminal block (power/output)

BNC interface has strong anti-interference ability, and the terminal block wiring is convenient and reliable

insulation resistance

≥100MΩ（500V DC）

Effectively isolate strong and weak electricity to ensure the safety of equipment and personnel

3、 Applicable scenarios and application areas

This feedback board, with its high reliability and adaptability, is widely used in industrial fields that require precise DC speed control. Typical scenarios include:

-Power industry: DC speed regulation system for auxiliary equipment such as feed pumps and induced draft fans in thermal power plants and hydropower stations, to achieve stable operation and energy consumption optimization of auxiliary equipment.

-Metallurgical industry: Production equipment such as rolling mills and coiling machines in steel plants ensure steel rolling accuracy and production efficiency through precise feedback control.

-Chemical industry: Equipment such as stirring motors and conveying pumps for chemical reaction vessels ensure stable control of parameters such as speed and flow rate during the production process, thereby improving product quality.

-Manufacturing industry: DC drive systems for CNC machine tools and production line transmission equipment to achieve high-precision motion control and collaborative operation of equipment.

-Energy industry: DC converter units in wind power and solar energy storage systems to ensure stable signal feedback during energy conversion.

Installation and usage precautions

1. Installation environment requirements: It should be installed in a well ventilated, dust-free, and non corrosive gas control cabinet, avoiding direct exposure to humid, high-temperature, or strong electromagnetic radiation environments. The installation location should be far away from high-voltage cables and high-power equipment to reduce interference.

2. Wiring specifications: Strictly follow the product wiring diagram for wiring, and the positive and negative poles of the power supply must not be reversed; When connecting BNC interfaces, it is necessary to ensure that the threads are tightened to avoid signal looseness and transmission abnormalities; After the wiring is completed, insulation testing is required to ensure that there is no risk of short circuit.

3. System matching: Before use, it is necessary to confirm that the feedback board fully matches the model and version of the control system (such as the GE Mark VI series), and perform parameter calibration through GE dedicated configuration software to ensure compatibility with the system.

4. Maintenance points: Regularly check the interface connection status and clean the onboard dust; If there is a signal abnormality, you can first use a multimeter to detect the input/output signal, eliminate wiring problems, and then troubleshoot the onboard circuit to avoid disassembling components without authorization.

Product advantages

-Brand guarantee: Produced by GE factory, meeting industrial quality standards, undergoing strict environmental testing and reliability verification, with a service life of up to 8-10 years.

-Strong anti-interference ability: Built in multiple EMC electromagnetic compatibility designs can effectively resist electromagnetic interference in industrial sites, ensuring stable signal transmission.

-Wide adaptability: not only compatible with GE's own series of control systems, but also adaptable to some third-party DC speed control systems through parameter adjustment, flexible application.

-Convenient operation and maintenance: The onboard status indicator light can intuitively display the working status of power, signals, etc., making it easy to quickly locate faults and reduce operation and maintenance costs.