GE DS200SIOCG1A VME Standalone I/O Board, for Advanced Control Systems

DS200SIOCG1A VME Standalone I/O Board, for Advanced Control Systems

Board Type:VMEbus Stand I/O Model Number:DS200SIOCG1A Processor Speed:Up to 80 MHz Bus Interface:VME64x Power Consumption:50 W max Memory Size:2 MB RAM, 1 MB EEPROM Operating Temperature:-40"C to +85"C Mounting Type:Conformal coated PCB, front panel connectors Dimensions:Width 9.0 inches, Depth 1.5 inches, Height 1.0 inches Weight:Approximately 1.5 lbs Engineered for seamless integration into existing control systems, the GE DS200SIOCG1A VME Standalone I/O Board offers superior performance and reliability, ensuring smooth operation in demanding industrial environments. Featuring a versatile interface that supports both RS-232 and RS-485 protocols, this board facilitates efficient data exchange between various components of an automation system. 

 Equipped with a robust power supply, the DS200SIOCG1A ensures consistent operation under varying conditions, contributing to the overall stability and efficiency of the system. With its compact yet powerful design, the board optimizes space utilization within the control cabinet, promoting streamlined system layout and easy maintenance. The GE DS200SIOCG1A comes with comprehensive documentation and technical support, ensuring quick deployment and minimizing downtime during installation and troubleshooting. The GE DS200SIOCG1A VME Standalone I/O Board is designed for integration into advanced control systems, offering enhanced performance and reliability in industrial automation. 

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).