GE FANUC IC600YB842 Analog Input Module Advanced Control Solutions

GE FANUC IC600YB842 Analog Input Module Advanced Control Solutions

Model Number:IC600YB842 Type:Analog Input Module Brand:GE FANUC Series:IC600YB Series Operating Temperature:-10"C to 55"C Storage Temperature:-20"C to 60"C Input Range:0 to 10 VDC / 4 to 20 mA Number of Channels:16 Connector Type:DB9 Connector Power Supply Voltage:24 VDC Dimensions:178 mm x 113 mm x 64 mm Weight:0.7 kg Engineered with precision and reliability, the GE FANUC IC600YB842 Analog Input Module ensures accurate data acquisition from industrial sensors and machinery, enhancing the efficiency and accuracy of your automation processes. 

 Featuring a wide operating range and exceptional accuracy, this module is ideal for applications requiring high-level control over analog signals, from temperature monitoring to flow rate measurement. With its robust communication capabilities, the IC600YB842 seamlessly integrates into existing industrial networks, supporting Modbus RTU protocols for easy setup and compatibility. Designed for durability and long-term performance, the module can withstand harsh industrial environments, ensuring reliable operation under extreme conditions. 

 Installation and maintenance are simplified with user-friendly design features, allowing for quick setup and efficient troubleshooting, saving you time and effort in system management. The GE FANUC IC600YB842 Analog Input Module is a high-performance industrial control solution designed for precision data acquisition in demanding environments. It excels in applications requiring accurate analog signal conversion and processing.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).