GE FANUC IC694ALG223 High-Performance Analog Input Module

GE FANUC IC694ALG223  High-Performance Analog Input Module

Model Number:IC694ALG223 Module Type:Analog Input Module Channels:8 Analog Resolution:16-bit Operating Temperature Range:-40"C to +70"C Power Consumption:Less than 3W Communication Interface:RS-485 Bus Voltage:DC 24V Input Range:0-10V, 4-20mA Enclosure Type:IP20 Mounting:Panel The GE-FANUC IC694ALG223 is engineered to meet the demanding requirements of industrial environments. Its high-density design allows for efficient use of space on control panels without compromising performance. Each channel offers precise measurement capabilities, capable of handling both positive and negative currents and voltages within specified ranges, ensuring accurate data collection for process control and monitoring applications. 

 With a 16-bit resolution, this module provides exceptional detail in its analog readings, enabling detailed analysis and precise control in manufacturing processes. Featuring a fast sampling rate of 250 kHz, the IC694ALG223 ensures real-time data acquisition, crucial for dynamic industrial settings where quick response times are necessary. The module  robust temperature rating from -20"C to 60"C ensures reliable operation in a wide range of environmental conditions, making it suitable for various industrial locations. The GE FANUC IC694ALG223 Modular Analog Input Module provides 8 channels of high-resolution analog input for industrial control systems, enhancing precision and reliability in various manufacturing environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module