General Electric IC695ETM001DF Ethernet Interface Module Industrial Networking Innovation

General Electric IC695ETM001DF Ethernet Interface Module Industrial Networking Innovation

Communication Protocol:IEEE 802.3 Data Transfer Rate:100 Mbps Network Compatibility:Supports RS-485 and RS-422 protocols Power Supply:DC 24V Dimensions:3.5 in x 1.5 in x 1.75 in Temperature Range:-40"C to 70"C Environmental Conditions:IP20 rating for dust protection Operating Voltage:12 to 36 V DC Connectors:DB-9 connector for device connection The General Electric IC695ETM001DF Ethernet Interface Module is a cutting-edge solution designed to enhance the connectivity and data flow within industrial networks. Its robust design ensures reliable operation in a wide range of temperatures, making it suitable for various industrial applications. With a data transfer rate of 10/100 Mbps, this module supports high-speed communication, enabling efficient data exchange between devices in your industrial setup. 

It is compatible with the IEEE 802.3 standard, ensuring compatibility with a broad range of Ethernet protocols. Featuring a power supply voltage of 24 VDC, the module is compatible with the majority of industrial power sources, providing a versatile solution for diverse environments. Its compact size, measuring 112.7 mm x 76.2 mm x 76.2 mm, allows for easy integration into existing systems without compromising space. Equipped with a single RJ-45 Ethernet connector, the IC695ETM001DF simplifies the connection process, reducing the risk of errors during installation. 

The IP20 environmental protection rating indicates its resistance to dust and light splashes, further enhancing its durability in industrial conditions. Backed by the reputation of General Electric, this Ethernet Interface Module is not just a tool for communication; it  an investment in the future of your industrial network. Its advanced features and reliable performance make it an essential component for achieving seamless data management in your operations. The GE IC695ETM001DF Ethernet Interface Module is designed for high-speed data transmission in industrial automation systems, ensuring reliable communication between devices. 

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink