ABB EL3020 EL3040 Continuous gas analysers
The following analyzers are available for selection:
Uras26 infrared photometer for the measurement of infrared-active gas components e.g. CO, NO, SO2
Limas23 ultraviolet photometer for the measurement of NO, NO2 and SO2
Magnos206 oxygen analyzer for the measurement of O2 in process gas or in N2
Magnos27 oxygen analyzer for the measurement of O2 in flue gas or in N2
ZO23 trace oxygen analyzer for the measurement of O2 in pure gases (N2, CO2, Ar)
Caldos27 thermal conductivity analyzer for the measurement of binary gas mixtures with different thermal conductivity e.g. Ar in O2, H2 in Ar, CH4 in N2
Fidas24 flame-ionization detector for the measurement of hydrocarbons
Electrochemical oxygen sensor for the measurement of O2
QAL3 monitoring
QAL3 monitoring is available as an option in the gas analyzer. It is used to fulfill the requirements according to EN 14181 for storage and analysis of device adjustment data. The QAL3 monitoring option features the following functions:
Automatic acquisition, verification and documentation of drift and precision at zero and reference points
Reporting via CUSUM and Shewhart control charts
QAL3 data storage in the gas analyzer (maximum 1 year)
QAL3 data display and read-out as well as parameter setting via web browser
Status messages on deviations beyond requirements
Data export for further processing with spreadsheet programs
The electrical interfaces for the output of measured values and communication with external systems include
The integrated Ethernet-10/100BASE-T interface (for gas analyzer configuration, software update and QAL3 data transfer) as well as the integrated I/O modules depending on the functional range and order
2-way and 4-way analog output modules with two or four analog outputs,
Digital I/O module with four digital inputs and four digital outputs,
Modbus module with one RS485 and one RS232 interface,
Profibus module with one RS485 and one MBP interface.
email:1583694102@qq.com
wang@kongjiangauto.com