GE Fanuc IC697VAL318 Analog Input Module New

Fanuc IC697VAL318 Analog Input Module  New

Model Number:IC697VAL318 Type:Analog Input Module Operating Voltage:24V DC Input Channels:16 Signal Types Supported:Voltage, Current Range of Measurement:卤10V, 卤20mA Resolution:16-bit Accuracy:卤0.02% Operating Temperature Range:-40"C to +85"C Dimensions (WxHxD):101.6mm x 44.45mm x 96.52mm Weight:0.18kg The GE Fanuc IC697VAL318 Analog Input Module is a high-performance component engineered for seamless integration into complex industrial control systems. It is capable of accurately sensing and transmitting electrical signals from various sensors, providing real-time data essential for process optimization and quality control. 

 This module supports a wide range of signal types, including 4-20mA and 0-20mA currents, ensuring compatibility with a broad spectrum of industrial equipment. Its robust design withstands harsh environmental conditions, making it suitable for applications in extreme temperature ranges. With its compact size and lightweight construction, the IC697VAL318 is easy to install and can be integrated into existing systems without significant space constraints. It utilizes advanced signal processing techniques to minimize noise and interference, ensuring reliable data transmission even under challenging operational environments. The module comes equipped with a user-friendly interface for configuration and diagnostics, facilitating quick setup and troubleshooting. It is part of the extensive GE Fanuc 90-70 series, renowned for its reliability and versatility in industrial automation. 

 Designed for long-term durability, the IC697VAL318 is backed by comprehensive technical support and warranty services. It is an ideal choice for manufacturers looking to enhance their production efficiency and precision through state-of-the-art analog data acquisition solutions. The GE Fanuc IC697VAL318 is an advanced analog input module designed for precise signal acquisition in industrial automation systems, offering enhanced reliability and accuracy. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module