UFC921A101 3BHE024855R0101 DC power



UFC921A101 3BHE024855R0101 DC Power module In practical applications, the controller mainly consists of three-phase input power modules (DC24V/50Hz) and input DC power modules (DC300/50Hz), and corresponding reactors are provided as required to ensure the normal operation of the power grid. The three-phase input power module is usually installed above the three-phase AC input power supply. Connected with DC24V/50 Hz controller, the input signal of DC24V/50 Hz controller can be directly controlled by PLC,PLC is the most frequently used device in the module controller, the working mode of PLC is to install two capacitors in parallel inverter circuit in the module. The DC voltage of the DC reactor is converted to the AC voltage output to the module.

UFC921A101 3BHE024855R0101 This section describes the common fault diagnosis and handling methods of an ABB DC power module controller. ABB DC power module controller uses the DC input current and voltage as the current output signal, and provides the input signal through PLC and other devices (including computers) to collect and control the current signal. Sensors can be used when you need to measure the maximum switching frequency, switching cycle time or DC voltage; When you need to measure DC voltage cycle time or DC voltage, you can use the DC controller; At the same time, it can also measure the parameters of the output voltage of the two-phase input power module, such as the value of the peak voltage and the average current.

System 800xA extended automation

Using the latest and most advanced technology and research, ABB is committed to providing customers with the most powerful and scalable automation systems to meet their needs.

By adopting ABB's flagship automation system - System 800xA-ABB helps enterprises create a collaborative environment, enabling the non-dimensional integration of PLCS, control systems, maintenance systems and ERP - providing a straight-forward integrated process operations platform. That's the power of integration. This is 800xA.

System features:

Superior operator efficiency

There is an increasing need for operators to achieve superior efficiency, and operator decisions every day directly impact cost, availability, safety and quality.

Integrated process and power automation

ABB uses System 800xA for integrated metering, electrical and substation automation solutions. Integrated security

System 800XA reduces operating costs throughout the plant by providing a unified environment for productivity control, safety monitoring, and productivity monitoring. SIL3 TuV certification.

Advanced asset management

ABB's Asset management program improves asset availability and performance and aims to optimize operational and maintenance efficiency.

Controller:

800xA hardware

The AC 800M controller consists of track-mounted modules, including a CPU, communication module, power module, and various accessories. Several CPU modules are available, which vary in terms of processing power, memory size, SIL rating, and redundancy support.

800xA control software

AC800M control software includes :- Firmware, which needs to be downloaded to the controller; - Library, the control software library to be used when generating the control application software; Control the application.

Introduction to S800I/O:

The S800 I/O is a complete distributed modular process I/O system that communicates with the parent controller via a standard fieldbus. Because of its extensive connectivity, it can be used in a wide range of process controllers from ABB and other suppliers.

The system can be installed in the field, adjacent to the sensor and trigger, and the wiring cost is low, so the S800I/O can greatly reduce installation costs. With hot swappable modules, online reconfiguration and redundancy options, the system supports the improvement of production efficiency and greatly improves the project profit.

S800 I/O features include:

Complete product family Flexible configuration and installation Easy dry assembly High reliability and accuracy HART protocol Verified I/O modules Redundancy High integration I/O modules (SIL3 certified) High precision time stamp communication error output Settings. I/O modules with built-in security interfaces

S800LI/O

The low cost design and installation at only 59mm depth make the S800LI/O module the best choice for PLC applications.

Rugged exterior, integrated operation, easy installation and intelligent connectivity reduce your time at all stages of installation.

Because all the required information is pre-installed on the Compact Control Builder, configuring the S800LI/O and AC800M is extremely simple. In addition, through the GSD file,

The S800LI/O can be used in any control system.

In addition, because the S800LI/O is a sub-device of the S800/O system with eight million points worldwide, you can enjoy the resulting full-featured signal interface and high availability.

Choose Xiamen control Smith after sale worry

Excellent product quality

Only cooperate with manufacturers of first-line brands in the industry

Imports/Products

Good pre-sale service

Communicated with customers repeatedly about product model, quality, price and delivery date

Work with the customer to determine the best solution

Address user concerns in advance

Business execution in place

Ordered products delivered on time

Make perfect delivery plan to ensure the time limit

Assist users to handle the acceptance procedures

Perfect after-sales service

During the warranty period, problems will only be replaced and not repaired

Never put a problem on the back of your head

Service hotline 7x24 hours service

Solemn promise

1. All the items sold by the company, module card parts, etc., the quality problems arising from normal use during the warranty period are replaced free of charge, and there is no evasion.

2. For materials and equipment that have not been discontinued beyond the warranty period, only the cost of relevant parts will be charged for quality problems.

3. Provide replacement models and equipment replacement process services for discontinued materials and equipment.

4. Customers have purchased materials and equipment, lifetime free upgrade system software, related technical information provided free of charge.

5. Visit the use of materials purchased by customers from time to time, and solve any problems in time.

6. The company hotline provides 24-hour service, and the questions raised by customers are answered within 1 hour.

7. Not done, the company spirit of "thoughtful service, responsible to the end" attitude, from the customer's point of view to solve the problem, with serious and rigorous enterprise style, dedicated to each customer service.