GE 336A4940CSP23 IS220PDIOH1A I/O pack module

GE 336A4940CSP23 IS220PDIOH1A I/O pack module

ABOUT THE 336A4940CSP23 IS220PDIOH1A

The IS220PDIOH1A is an I/O pack module for a Mark VIe Speedtronic system.  The Mark VIe is one of the later systems released by General Electric under the Speedtronic name.  Speedtronic systems have been used for industrial turbine control since the late 1960s when General Electric released the Mark I. 

The IS220PDIOH1A has two Ethernet ports and its own local processor.  It can be used in conjunction with terminal boards IS200TDBSH2A and IS200TDBTH2A. These I/O pack/terminal board combinations have been approved for use in hazardous locations.  

SPECIFICATION

• 802.3, 802.3u, and 802.3x compatibility 

• 10/100 base copper with auto negotiation 

• Full/half duplex auto-negotiation 

• 100 Mbps FX uplink port 

• HP-MDIX auto sensing 

• LEDs to indicate status of Link Presence, Activity and Duplex, and Speed per port (each LED has two colors) 

• LED to indicate power status 

• Minimum 256 KB buffer with 4 K media access control (MAC) addresses 

• Redundant power supply inputs (Diode-OR'd)

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Technical characteristics

Electrical characteristics: The modules have specific electrical characteristics, including rated voltage, rated current, rated power, impedance, frequency response, etc. These characteristics ensure stable operation of the modules in the system.

Physical dimensions: The module has compact physical dimensions for easy integration into industrial automation systems. It also has specific weight and mounting requirements to ensure proper installation and use in the system.

Operating Conditions: The GE 336A4940CSP23 IS220PDIOH1A I/O module is able to operate reliably under certain environmental conditions, including temperature range, humidity, pressure, shock and vibration resistance. These features allow the module to adapt to a variety of harsh industrial environments.

Compliance and safety standards: The module complies with various safety standards, industry regulations or certifications, such as UL, CE, etc., ensuring its safety and reliability in the system.

Functions and Applications

Signal Processing: GE 336A4940CSP23 IS220PDIOH1A I/O module is capable of receiving, amplifying, filtering, digitising and processing a variety of input signals for data acquisition and conversion.

Communication Interface: The module usually provides a variety of communication interfaces, such as Ethernet, serial port, CAN bus, etc., for data exchange and control with other devices and systems.

Data Acquisition: The module can be used to acquire data from various sensors and devices, including temperature, pressure, liquid level, flow rate, etc., to provide real-time data support for industrial automation systems.

Control and regulation: GE 336A4940CSP23 IS220PDIOH1A I/O modules may be used to control and regulate actuators in the system, such as motors, valves, pumps, etc., for automated process control.