Reliance 0-60063-1-A printed circuit board
Product description
The Reliance 0-60063-1-A is a printed circuit board used as a pressure stabilizer.
The 0-60063-1-A is designed as a PMI regulator motherboard for the Asea Brown Boveri/Reliance Electric SA3100 series. The SA3100 AC power inverter is used in Automax distributed power systems, providing variable frequency and variable voltage.
Before adding any type of boxing or external transport material, the 0-60063-1-A weighs about 1.69 pounds. The board is no longer available from the OEM, but is usually in stock at AX Control.
The 0-60063-1-A can communicate with the AutoMax UDC module through two fiber optic connectors located on the edge of a circuit board. The board is also used to monitor drive operation and run motor control algorithms. Other interfaces include PMI interface connectors, AC power technology circuits, instrument ports, Flex I/O, synchronous transmission port connectors, and PMI processor circuits. The measuring instrument port is located in a terminal block along the edge of one board. These can be connected to external analog devices using 14-22 AWG twisted pair wire (maximum length 13 feet).
The 0-60063-1-A is designed for installation using four factory holes (located at the corners of the circuit board) that slide over the key pins. These should be carefully aligned during installation to ensure that no damage occurs.
email:1583694102@qq.com
wang@kongjiangauto.com